Arduino Pro Micro — ATmega32U4 USB Development Board

The Arduino Pro Micro is a compact ATmega32U4-based development board with native USB support — making it perfect for USB HID projects like custom keyboards, gamepads, and MIDI controllers. Small enough to embed into almost any enclosure.

Key Features: 

- ATmega32U4 microcontroller with native USB 

- 5V / 16MHz or 3.3V / 8MHz operating modes 

- 12 digital I/O pins, 4 PWM, 6 analog inputs 

- Micro-USB or USB-C connector (variant dependent) 

- Compatible with Arduino IDE 

What's in the Box: 

- 1x Pro Micro board 

Great for custom HID devices, USB keyboards, mouse emulators, and small embedded projects.

Description:

The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.

The USB transceiver inside the 32U4 allows us to add

USB connectivity on-board and do away with bulky external USB interface.

This tiny little board does all work for Arduino tricks that you're familiar with:

4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as

hardware serial connections Rx and Tx. Running at 16MHz and 5V,

this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere.

There is a voltage regulator on board so it can accept voltage up to 6V(Blue board)/ 18V(Purple board).

If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.

We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.

Features:

ATMega 32U4 running at 5V/16MHz

Supported under for Arduino IDE v1.0.1

On-Board MINI USB connector for programming

4 x 10-bit ADC pins

12 x Digital I/Os (5 are PWM capable)

Rx and Tx Hardware Serial Connections

Our Smallest for Arduino-Compatible Board Yet!